idotConnect 2 Port SATA Raid + 4 Port USB 2.0 + 3 Port 1394A PCI Card

idotConnect PCI slot-saver technologies integrate SATA, USB 2.0 and 1394A into one simple PCI host controller card. SATA host controller is designed to offer a high performance, cost effective and reliable solution for those needing to accommodate storage peripherals with SATA interface and with limited PCI slots. All-in-one card combines the latest technologies and RAID functions into one PCI card. Offering RAID 0, 1 and or the normal functions of the SATA, no other similar card performs better.

Features:

• Provides dual independent SATA channels
• Provides RAID 0, 1 or non-RAID functions
• Provides 3 FireWire ports (2 external / 1 internal)
• Provides 4 USB 2.0 / USB 1.1 ports (2 external / 2 internal)
• High-speed SATA or SATA with RAID functions
• Dual high-speed SATA interface ports, each supporting 1st generation SATA rates (1.5Gb p/s)
• Provides RAID 0 striping to greatly increase the performance of data transfer by simultaneously writing data to 2 drives
• Provides RAID 1 mirroring to protect the data from a disk failure by writing identical data on 2 drives
• Fully compliant with SATA 1.0
• Independent 256 byte FIFO (32 bit * 64 deep) per SATA channel for host read/write
• Supports spread spectrum in receiver
• SATA to PCI interrupt masking
• Watch dog timer for fault resiliency
• Acts as non-RAID when BIOS not configured as RAID functions

USB 2.0

• Compliant with USB 2.0 (data rates 1.5 / 12 / 480Mb p/s)
• Compliant with open host controller interface for USB 1.0a
• Compliant with enhanced host controller interface for USB 0.95
• Provides 4 USB 2.0 / USB 1.1 ports (2 external / 2 internal)

FireWire

• Compliant with IEEE 1394 open host controller interface 1.1 and IEEE standard. 1394a-2000
• Provides three 1394 ports at 100 / 200 / 400Mb p/s
• Built-in FIFO for isochronous transmit (2048 bytes), asynchronous transmit (2048 bytes), and receive (3072 bytes)
• 32 bit CRC generation and checking for receive/transmit packets

System Requirements:

• Available PCI slot on main board
• Windows ME / 2000 / XP / Vista

Package Includes:

• One 2 Port SATA Raid + 4 Port USB 2.0 + 3 Port 1394A PCI Card
• Driver

.....Simply The Right Choice